TULA.VN - Electronics Materials and Instruments in Vietnam  
       TIẾNG VIỆT     
Home | Line Card | Letter | Site Map | Contact Us
            
DEVICE PROGRAMMER | INSTRUMENTS | MATERIALS | COMPONENTS | SERVICE ABOUT US | FAQ
 PDODUCTS
Device Programmers
»
Universal Programmer
»
Gang Programmer ¦
»
In-System Programmer
»
Specialized Programmer
»
Auto. Handler System
»
Sockets and Accessories
»
Eprom Eraser, IC Tester
»
HDD/memory Duplicator
»
Jig test ICT/FCT/DIP-pallet
Test and Measurement
»
Osciloscope, HDS, MSO
»
Spectrum/Network/Logic
»
Data Logger and Sensors
»
Digital Multimeter
»
Generator, Freq. couter
»
LCR, component tester
»
Power Supply, elec. load
Design, Assembly Tools
»
Training & Education KIT
»
Embedded Dept. Tools
»
Rework & Solder tools
»
SMT/ PCBA Equipments
Other electronics Tools
»
Automotive Tools
»
Telecom, Television
»
Optical, Force, Torque
Electronics components
»
MCU 8051-core series
»
Nuvoton ARM Cortex-M
»
Voice and Audio ICs
»
Nuvoton ARM7/9 Soc
»
Wireless RF IC, Tools
 Số lượt truy cập
We received

239233517
page views since 20/12/2006
 Ai đang online
There are currently, 0 guest(s) and 0 member(s) that are online.

You are Anonymous user. You can register for free by clicking here



OUR PARTNERS
(Products Line-Card)



Flash Support Group

PEmicro

Power Supply

Shenzhen KESD Technology Co.,Ltd.



Car and Consumer IC Solutions Provider


  

Category: Main/3. Electronics Equipments & Systems for embedded electronics design and PCB assembly/3.4 SMT Line System


      
  YS-100: Automatic face mask ear rope ear loop ear wire cutting machine (Máy cắt dây tai đeo mặt nạ tự động)
  Part#: ROBOTSUNG YS-100
  Ghi chú: Máy cắt tự động
  Nhãn hiệu: ROBOTSUNG (Trung Quốc/China)
  Cấu hình: YS-100 / YS-120 / YS-160
  [ Tài liệu Datasheet ]   [ Quotation Quotation sheet ]   [ Shopping Shopping now ]   [ Views: 770 ]   2023-11-13

 ◊ Mô tả chi tiết:

Machine to cut face mask ear loop,ear wire,ear rope and nose bridge strip,nose bridge bar and aluminum strip



 Thêm chi tiết:

Product Description

Application
 - Tube:  PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.
 - Cable: Flat cable, copper wire, etc.
 - Tape: nickel strap, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, etc.
 - Sheet: battery separator, Nickel sheet, diffuser sheet, plastic/rubber sheet, pvc sheet, etc.
 - Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper, etc.

 
Features
1.High speed: It can cut 100~120 cut per minute. (50mm long)
2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.
3.Cutting type: For cold cut and Optional hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.
4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.
5.Automatic stopper: It stops automatically if materials run out during operation
6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on
7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.
8.High speed, high accuracy, designed for cutting non-adhesive materials.
 
Specification 
Model: YS-100
1. Voltage: AC220V/50Hz & AC110V/60Hz
2. Power : 250W
3. Cut Length : 0.1-9999.9mm
4. Cut Width : 0-100mm
5. Cutting Thickness : 0-12mm
6. Dimension : L360*W300*H350MM
7. Net Weight : 28kg
 
Typical specifications

Electrical Source 220V 50/60HZ
Power 250W
Cut Length from 0.1 MM to 9999.9MM
Cut Width from 0.1 MM to 155MM
Cut Speed It depen on the cut length,from 50 PCS to 120PCS per minute
Net Weight 29KG
Outer size L360*W370*H350 mm
Packaging detail Carton or wooden case within foam plastics.L700MM*W550MM*H450MM.


YS-100 / YS-120 / YS-160
 

Specifications
Voltage:220/110v 50/60HZ
Power:250w
Cutting Length:0.1-9999.9mm
Cutting Width:0-100mm
Weight:28kg
Size:L360*W300/320/360*H350mm
 
YS-100W / YS-120W / YS-160W / YS-200W
YS-250W / YS-300W / YS-400W / YS-500W




CÁC SẢN PHẨM KHÁC CÙNG NHÀ SẢN XUẤT / OTHER PRODUCTS FROM ROBOTSUNG
YS-805B PCB Separator: Máy cắt tách PCB YS-805B, khả năng cắt 600mm
YS-805C: PCB Separator - Máy cắt tách PCB, khả năng cắt 900mm
YS-805A: PCB Separator - Máy cắt tách, khả năng cắt 400mm
YS-805D PCB Separator: Máy cắt tách PCB YS-805D, khả năng cắt 1300mm
YS-FB310: Table type Curve PCB Separator (máy cắt tách bảng mạch in bằng mũi phay)
YS-100: Automatic face mask ear rope ear loop ear wire cutting machine (Máy cắt dây tai đeo mặt nạ tự động)
YS-L302-2 One Head One Table Auto Screwdriver Machine: Máy vặn vít tự động một đầu, một bàn
YS-HX331: Automatic desktop soldering machine (Máy hàn tự động kiểu để bàn)



Thao tác người sử dụng: [ Add Download ]

 





CONDITTION AND USING TERMS

TULA Solution Co., Ltd - Công ty TNHH Giải pháp TULA
Headquater: No. 173 Group 15, Dong Anh District, Hanoi 10000, Vietnam
Head-Office: No. 6 Lane 23, Đình Thôn street, Mỹ Đình ward, Nam Từ Liêm Dist., Hà Nội, Vietnam
Tel.: +84-24.39655633,  Hotline: +84-912612693,  E-mail: info (at) tula.vn

 
Copyright © 2005-2023, TULA Solution Co., Ltd. All right reservedABOUT US | FAQ