TULA.VN - Electronics Materials and Instruments in Vietnam  
       TIẾNG VIỆT     
Home | Line Card | Letter | Site Map | Contact Us
            
DEVICE PROGRAMMER | INSTRUMENTS | MATERIALS | COMPONENTS | SERVICE ABOUT US | FAQ
 PDODUCTS
Device Programmers
»
Universal Programmer
»
Gang Programmer ¦
»
In-System Programmer
»
Specialized Programmer
»
Auto. Handler System
»
Sockets and Accessories
»
Eprom Eraser, IC Tester
»
HDD/memory Duplicator
»
Jig test ICT/FCT/DIP-pallet
Test and Measurement
»
Osciloscope, HDS, MSO
»
Spectrum/Network/Logic
»
Data Logger and Sensors
»
Digital Multimeter
»
Generator, Freq. couter
»
LCR, component tester
»
Power Supply, elec. load
Design, Assembly Tools
»
Training & Education KIT
»
Embedded Dept. Tools
»
Rework & Solder tools
»
SMT/ PCBA Equipments
Other electronics Tools
»
Automotive Tools
»
Telecom, Television
»
Optical, Force, Torque
Electronics components
»
MCU 8051-core series
»
Nuvoton ARM Cortex-M
»
Voice and Audio ICs
»
Nuvoton ARM7/9 Soc
»
Wireless RF IC, Tools
 Số lượt truy cập
We received

237161252
page views since 20/12/2006
 Ai đang online
There are currently, 0 guest(s) and 0 member(s) that are online.

You are Anonymous user. You can register for free by clicking here



OUR PARTNERS
(Products Line-Card)



Flash Support Group

PEmicro

Power Supply

Shenzhen KESD Technology Co.,Ltd.



Car and Consumer IC Solutions Provider


  

Category: Main/3. Electronics Equipments & Systems for embedded electronics design and PCB assembly/3.4 SMT Line System


      
  1800HT: Conveyor Reflow Oven
  Part#: DDM NOVASTAR 1800HT
  Ghi chú: Lò hàn băng tải 1800HT
  Nhãn hiệu: DDM NOVASTAR (Mỹ/USA)
  [ Tài liệu Datasheet ]   [ Quotation Quotation sheet ]   [ Shopping Shopping now ]   [ Views: 4165 ]   2022-07-02
 ◊ Đặc điểm chính:

Reflow oven with four (4) heating zones and 18" (457mm) wide conveyor for low to medium volume soldering production runs.   The 1800HT solder reflow oven utilizes our patented Horizontal Convection® heating technology for extremely uniform temperature profiling across the board for enhanced reflow surface-mount process control.  

Units available with a maximum temperature of 400°C (752°F) and can be used for lead or lead-free solder applications.The ProcessSentryTM microprocessor control is the brain of this reflow oven.   All parameters are set and displayed in real time. The ProcessSentryTM is sophisticated yet clear and straightforward.  Programming is intuitive and operation is truly user-friendly.  The system provides unrivaled accuracy and repeatability while assuring safety and reliability.  Also, a PC interface is optionally available.

  • Four (4) vertical heating zones plus cooling zone.
  • Low mass 18" (457mm) wide stainless steel conveyor
  • Status light tower included
  • Easy lift clamshell hood design with gas strut assist
  • Edge rail conveyor option available
  • Real time graphic temperature profiler to assist in profiling of board
  • PC interface software optionally available
  • Nitrogen gas (N2) inerting option available
  • Reflow oven is Lead and Lead-free compatible
  • Custom options, systems. and parts are available.



 ◊ Mô tả chi tiết:

Lò nấu chảy lại với bốn (4) vùng gia nhiệt và băng tải rộng 18 "(457mm) để vận hành sản xuất hàn với khối lượng từ thấp đến trung bình. Lò nung hàn lại 1800HT sử dụng công nghệ gia nhiệt Horizontal Convection® đã được cấp bằng sáng chế của chúng tôi để định dạng nhiệt độ cực kỳ đồng đều trên bảng để tăng cường quá trình nấu lại kiểm soát quá trình gắn bề mặt. Các đơn vị có sẵn với nhiệt độ tối đa 400 ° C (752 ° F) và có thể được sử dụng cho các ứng dụng hàn chì hoặc không chì.

Bộ điều khiển bộ vi xử lý ProcessSentryTM là bộ não của lò nấu lại này. Tất cả các thông số được thiết lập và hiển thị trong thời gian thực. ProcessSentryTM tinh vi nhưng rõ ràng và đơn giản. Lập trình trực quan và hoạt động thực sự thân thiện với người dùng. Hệ thống cung cấp độ chính xác và độ lặp lại vô song đồng thời đảm bảo độ an toàn và độ tin cậy. Ngoài ra, một giao diện PC có sẵn tùy chọn.

  • Bốn (4) vùng sưởi dọc cộng với vùng làm mát.
  • Băng tải thép không gỉ rộng 18 "(457mm) khối lượng thấp
  • Tháp đèn trạng thái bao gồm
  • Thiết kế mui xe dạng vỏ sò nâng dễ dàng với hỗ trợ thanh chống khí
  • Có sẵn tùy chọn băng tải đường sắt cạnh
  • Bộ định dạng nhiệt độ đồ họa thời gian thực để hỗ trợ định dạng bảng
  • Phần mềm giao diện PC có sẵn tùy chọn
  • Có sẵn tùy chọn trơ khí nitơ (N2)
  • Lò Reflow tương thích với Chì và Không Chì
  • Tùy chọn tùy chỉnh, hệ thống. và các bộ phận có sẵn.

SMT Reflow Oven DDM Novastar Model 1800HT

Max board width18" (457mm)
Max board height1.375" (35mm)
Heating zones4 Top, 4 Bottom
Max temperature400°C (752°F)
Heat tunnel length50" (1250mm)
CyclonicsTM (forced air)Eight (8)
Conveyor extensionsOption
Cooling station(s)Two (2)
VentingTwo 4" (102mm) dia. Flanges, 250 CFM (425m3/h) each
Cooling Zone VentingFour (4)
Nitrogen optionYes
PC InterfaceIncluded
Overall dimensions (L x W x H)94" x 43" x 50" (2388mm x 1092mm x 1270mm)


Video:




CÁC SẢN PHẨM KHÁC CÙNG NHÀ SẢN XUẤT / OTHER PRODUCTS FROM DDM NOVASTAR
Novascope: Semi-Automatic PCB Inspection System
GF-125: Five Zone Benchtop Reflow Oven
1800HT: Conveyor Reflow Oven
GF-120HT: Reflow Oven
GF-12HT: Benchtop Reflow Oven
GF-B-HT: Batch Reflow Oven
GF-C2-HT Reflow Ovens
GF-DL-HT: Hot Plates (Bộ mâm gia nhiệt)
NovaPlace Automated Pick & Place
LS40V Pick and Place Machine with Vision
LE-40V Pick and Place Equipment with Vision
LE40 Pick and Place Machine
LS40 Pick and Place Machine
MPP-21 Pick and Place System
SPR-45VA: Stencil Printer (máy in stencil)
SPR-45: Semi-Automatic Stencil Printer (Máy in stencil bán tự động)
SPR-20: Solder Stencil Printer (máy in kem hàn)
LS60V: Pick and Place Machine with Vision - Máy dán chip có tích hợp công nghệ hình ảnh
LS60: Pick and Place Machine - máy dán chip
MPP-11: Manual Desktop Pick and Place Machine - Máy dán chip thủ công kiểu để bàn
GF-SL-HT: Hot Plates - Mâm gia nhiệt
SPR-25: Stencil Printer - Máy in kem hàn
NovaSelect Series



Thao tác người sử dụng: [ Add Download ]

 





CONDITTION AND USING TERMS

TULA Solution Co., Ltd - Công ty TNHH Giải pháp TULA
Headquater: No. 173 Group 15, Dong Anh District, Hanoi 10000, Vietnam
Head-Office: No. 6 Lane 23, Đình Thôn street, Mỹ Đình ward, Nam Từ Liêm Dist., Hà Nội, Vietnam
Tel.: +84-24.39655633,  Hotline: +84-912612693,  E-mail: info (at) tula.vn

 
Copyright © 2005-2023, TULA Solution Co., Ltd. All right reservedABOUT US | FAQ