TULA.VN - Electronics Materials and Instruments in Vietnam  
       TIẾNG VIỆT     
Home | Line Card | Letter | Site Map | Contact Us
            
DEVICE PROGRAMMER | INSTRUMENTS | MATERIALS | COMPONENTS | SERVICE ABOUT US | FAQ
 PDODUCTS
Device Programmers
»
Universal Programmer
»
Gang Programmer ¦
»
In-System Programmer
»
Specialized Programmer
»
Auto. Handler System
»
Sockets and Accessories
»
Eprom Eraser, IC Tester
»
HDD/memory Duplicator
»
Jig test ICT/FCT/DIP-pallet
Test and Measurement
»
Osciloscope, HDS, MSO
»
Spectrum/Network/Logic
»
Data Logger and Sensors
»
Digital Multimeter
»
Generator, Freq. couter
»
LCR, component tester
»
Power Supply, elec. load
Design, Assembly Tools
»
Training & Education KIT
»
Embedded Dept. Tools
»
Rework & Solder tools
»
SMT/ PCBA Equipments
Other electronics Tools
»
Automotive Tools
»
Telecom, Television
»
Optical, Force, Torque
Electronics components
»
MCU 8051-core series
»
Nuvoton ARM Cortex-M
»
Voice and Audio ICs
»
Nuvoton ARM7/9 Soc
»
Wireless RF IC, Tools
 Số lượt truy cập
We received

237189303
page views since 20/12/2006
 Ai đang online
There are currently, 0 guest(s) and 0 member(s) that are online.

You are Anonymous user. You can register for free by clicking here



OUR PARTNERS
(Products Line-Card)



Flash Support Group

PEmicro

Power Supply

Shenzhen KESD Technology Co.,Ltd.



Car and Consumer IC Solutions Provider


  

Category: Main/1. Device Programmer - Introduction and Guide/1.1 Universal Programmers


      
  GALEP-5: Mobile Device Programmer, built-in JTAG Debugger (48pin-driver, ISP, USB power)
  Part#: Conitec GALEP-5
  Giá (chưa VAT): 690$
  Ghi chú: Device Lists 23.000+
  Nhãn hiệu: Conitec (Đức/ Germany)
  [ Tài liệu Datasheet ]   [ Quotation Quotation sheet ]   [ Shopping Shopping now ]   [ Views: 3294 ]   2022-06-12
 ◊ Đặc điểm chính:
The new GALEP-5 is the first pocket sized, self-powered universal device programmer. Due to its size and power supply independence, a GALEP-5 is the ideal solution for development and service. Its high speed allows using it as a production programmer. And with its JTAG debugging capabilities it can also be used for microcontroller development. A real universal talent - for the lowest price per device in the industry!

GALEP-5 là bộ nạp đa năng đầu tiên có kích thước cầm tay, tự cấp nguồn. Bởi kích thước và nguồn cấp độc lập của nó mà GALEP-5 là giải pháp nhắm tới dùng cho dịch vụ và phát triển. Tốc độ cao của nó cho phép sử dụng nó như một bộ nạp dùng trong sản xuất. Và với khả năng debug JTAG của nó thì nó cũng có thể được dùng cho phát triển vi điều khiển. Đó thực sự là một bộ đa tài - với mức giá thấp nhất tính theo mỗi con chip trong ngành công nghiệp.

Unique Features:  ----  Các tính năng nổi bật
   - USB Powered 
   - Pocket Size 
   - JTAG Debugger 
   - Pin driver ICs 
   - 64 MB Data RAM 
   - Script Controlled 
   - ISP programming
   - Open Source Firmware 
   - Windows and Linux 
   - 57000 Devices 
   - ~1 Cent per Device!
- Cấp nguồn qua USB
- Kích thước cầm tay
- Có chức năng bộ debug qua JTAG
- Bộ điều khiển chân pin đa năng
- 64MB dữ liệu RAM
- Hỗ trợ điều khiển mã script
- Khả năng nạp ISP
- Phần mềm nguồn mở
- Chạy được trên Windows và Linux
- Hỗ trợ trên 57.000 chip
- cỡ 1 cent mỗi con chip!

Bộ nạp GALEP-5 đặc biệt phù hợp cho các kỹ sư nghiên cứu phát triển ứng dụng nhúng và đào tạo thiết kế.

 ◊ Mô tả chi tiết:
Supported Devices   - hỗ trợ nạp được hơn 57,000 mã chip và có khả năng thêm giải thuật nạp theo yêu cầu

GALEP-5 is a universal programmer for devices of the following types: EPROM, EEPROM, FLASH memory, serial EEPROM, NV-RAM, LPC, FPGA, PLD, EPLD, GAL, PALCE, PIC, Microcontroller (MCU). More than 57,000 devices algorithms are currently supported (GALEP-5 device list). Additionally, GALEP's JTAG player can program SVF/JAM data into all existing and future devices that have a JTAG port. If you need a device that's not yet in the list, please use our free Device on Demand Service - we'll implement any programmable device usually within 2 .. 4 weeks.

Ultra-Compact, USB-Powered Design  Thiết kế rất nhỏ gọn, tự cấp nguồn qua cổng USB

The GALEP-5 device programmer fits into your jacket pocket and weighs less than 200g, compared to 3..4 lbs of bulky competitor products. It is completely powered through the USB bus and does normally not require any additional power supply. Only when the programmable device consumes more than 500 mA, which is the case for few old NMOS devices and some microcontrollers, the included power adapter or batteries (6xAAA) can be used.

Extremely Fast Programming  - Tốc độ nạp siêu nhanh

GALEP-5 is uncompromisingly designed for speed. An internal 200 MIPS ARM-9 processor handles the data transfer; an 50,000 gates FPGA (user-programmable logic) controls the pin drivers and accelerates programming algorithms by setting up device-dependent state machines and UARTs. The hardware acceleration makes GALEP-5 one of the fastest device programmers on the market today. For instance, a MB91F467 Fujitsu Microcontroller (8 Mb) needs only 19 seconds for a serial program/verify cycle. A 256 Mb NOR Flash (28F256P30) is programmed and verified in 170 seconds. The internal 64 MByte RAM serves as data storage and allows to transfer data only once for programming multiple devices.

48 High-Speed pin drivers GALEP pin driver IC - Tích hợp bộ điều khiển đa năng 48 chân tốc độ cao

A custom-designed universal pin driver IC guarantees optimal signal quality at the output pins, and allows the small size and low power consumption of all GALEP chip programmers. Each of the 48 pins can generate the following signals:

  • Logical high between 1.2V .. 5.0V
  • Logical input, threshold 0.5V … 5.0V
  • Three programming voltages between 1.3V .. 25.0V
  • Three switchable resistors for pullup and pulldown
  • Adjustable clock rate
  • Ground
The switching regulators for the programming voltages are controlled by D/A converters in 100 mV steps. Further D/A converters are used to control the logic levels and the input threshold. For maximum protection of the programmable device, all voltages are permanently monitored by an independent circuit.

In System Programming - Hỗ trợ khả năng nạp ISP

The signals for In-System Programming (ISP) can be taken from a separately available ISP adapter or directly from the 48-pin ZIF socket. The help system provides information about the wiring of the target system for all supported components.

Software

The software runs under Windows 95, 98, ME, NT4, 2000, XP, Vista, Windows 7, and Linux. Besides basic functions such as erase, read, program and compare, split and shuffle, it features easy-to-use configuration options for any special functions required by the selected device. The software supports all common file formats, such as binary, Hex, JEDEC, and JTAG. Mass production is supported by providing statistics functions and serial number generation.
JTAG Support: Delete, program and verify components with JTAG interface (joint test action group, IEEE Std. 1149.1 ). The following formats are supported: SVF-Script in XSVF(Xilinx) format; JAM byte code player (ALTERA).
Batch mode: Run GALEP-5 from the command line, or implement GALEP commands in your own production software. The programmer can be completely controlled by a set of powerful batch commands.
Updates: The software is permanently improved for supporting new components (device list). If you need a certain device that's not yet supported, use our free Device on Demand Service. Free updates are available on our website in regular intervals.

JTAG Debugger   - Hỗ trợ khả năng gỡ rối chuẩn JTAG (tức là có chức năng như một bộ debugger chuyên nghiệp)

With GALEP-5 you can debug all Microcontrollers with JTAG interface that are supported by the OpenOCD (On Chip Debugger) software - ARM7, ARM9, XScale, and Cortex-M3 MCUs. The chip to debug is simply put into GALEP's programming socket or connected with GALEP through a cable or ISP adapter (please find details in the OpenOCD documentation). Additionally you can easily define test algorithms for in circuit testing of complete circuit boards (Boundary Scan) for small series production. This way your GALEP-5 becomes a complete development, test and production system!

Security

Prior to each function, GALEP checks the power consumption, correct positioning, and the contacts of all pins of the selected component. This effectively prevents any accidental damage to the component or the programmer.

Socket AdapterS

GALEP-5 programs components in DIL sockets up to 48 Pins between 300 … 600 MIL (ca. 7,5 … 16 mm) wide without additional adapters. Universal socket adapters are available for all components with up to 48 pins. Only one adapter per socket is required; few adapters = small system costs!
Adapters for components with more than 48 pins are also available. Because the pin number of the programming device is smaller than the pin number of the components, such adapters are specialized. If you have to program components with a high pin number frequently, a GALEP-5D (with up to 240 pin drivers) might be the more effective solution.
All GALEP-4 adapters can be used with GALEP-5. Adapters for the following sockets are available: SOIC, SOP, TSOP, SSOP, TSSOP, PLCC, QFP, TQFP, MLF.

Technical Specifications

Pocket format: ca. 80 x 115 x 33 mm (+7mm socket)
Weight: ca. 185 g
48-pin ZIF socket with 48 universal pin drivers
Programs low-voltage components down to 1.3V
USB 2.0 high-speed port
AC adapter plus battery compartment for high-power devices
200 MIPS ARM-9 RISC processor, 64 MB RAM, 8 MB Flash
FPGA (50K gates, 64Kb RAM)
3 linear voltage regulators for internal power supply
4 switching regulators for programming voltages
2 linear voltage regulators for logic levels and input threshold
2 Microcontrollers for internal voltage monitoring
8-channel D/A converter, 16-channel A/D converter
Embedded Linux 2.6 inside

Kit contains

GALEP-5 device
USB cable
AC adapter
CD with manual and software

System Requirements

Windows 32 Bit OS, 98SE / ME / NT4 / 2000 / XP / Vista
USB 1.0 or USB 2.0 port

PRICE

GALEP-5 Kit
GALEP-5 Kit with new for old discount

Certifications: CE, RoHS, ISO 9001.






CÁC SẢN PHẨM KHÁC CÙNG NHÀ SẢN XUẤT / OTHER PRODUCTS FROM Conitec
GALEP-5D: Heavy Duty Device Programmer, built-in JTAG Debugger
1190$/ 1590$/ 2290$
GALEP-5: Mobile Device Programmer, built-in JTAG Debugger (48pin-driver, ISP, USB power)
690$
GALEP-4: Low-Cost Portable Device Programmer (40 Pins, parallel port)
490$
Adapters & Accessories @ CONITEC
List @ MOQ
TULA @ Conitec



Thao tác người sử dụng: [ Add Download ]

 





CONDITTION AND USING TERMS

TULA Solution Co., Ltd - Công ty TNHH Giải pháp TULA
Headquater: No. 173 Group 15, Dong Anh District, Hanoi 10000, Vietnam
Head-Office: No. 6 Lane 23, Đình Thôn street, Mỹ Đình ward, Nam Từ Liêm Dist., Hà Nội, Vietnam
Tel.: +84-24.39655633,  Hotline: +84-912612693,  E-mail: info (at) tula.vn

 
Copyright © 2005-2023, TULA Solution Co., Ltd. All right reservedABOUT US | FAQ